雙組份打膠機開機報警的解決方法！
雙組份打膠機在使用過程中也會出現一些非常簡單的問題，比如報警是怎么回事？往往很簡單是事情，讓不明白的您措手不及，下面我們給大家講一下出現的原因以及解決辦法，讓您萬一出現問題的時候能以及的檢修，開始工作。
There are also some very simple problems in the use of the two-component dispenser, such as what is the alarm? It's often very simple. You can't understand it by surprise. Let's talk about the causes and solutions, so that you can repair and start work in case of problems.
種情況：就應該是管路堵了，膠壓力超高報警，看看膠壓力有沒有超高，超高的話清洗管路。
The first situation: it should be that the pipeline is blocked, the rubber pressure is too high to alarm, see if the rubber pressure is too high, if it is too high, clean the pipeline.
第二種情況 雙組份打膠機看看是不是伺服電機報警，看看配電柜里的伺服控制器有沒有報警的。
In the second case, the two-component gluing machine shall check whether the servo motor alarms and the servo controller in the power distribution cabinet alarms.
雙組份打膠機故障分析：
Failure analysis of two-component dispenser:
1機頭前進定位螺栓松動。解決方法：調節好并固定好。
1. The head forward positioning bolt is loose. Solution: adjust and fix it.
2 玻璃定位松動，使其失去作用。解決方法：調定好定位。
2. The positioning of glass is loose, which makes it useless. Solution: adjust the positioning.
3 活動量太大或吸盤的真空發生器損壞。解決方法：維修。
3. Too much activity or the vacuum generator of suction cup is damaged. Solution: repair.
4前移氣缸的前進力量太大。解決方法：調節前進速度。
4 forward cylinder has too much forward force. Solution: adjust the forward speed.
如果您是購買的我們的產品，可以聯系我們的業務人員或者售后，我們給您提供電話解決和上門服務，讓您一次購買設備，終身無憂。
If you are buying our products, you can contact our business personnel or after-sales service, we provide you with telephone solutions and door-to-door service, so that you can buy equipment once, without worry for life.
This article is published by http://www.g89.com.cn
上一篇：中空玻璃膠機的需要的電力是多少?
下一篇：雙組份打膠機自身特點帶來的使用優勢
