車輛維修基本常識要掌握
若打膠機長期處于濕潤的環境中，而且不留意對設備的頤養，那打膠機設備很容易會受潮，受潮容易對設備形成損壞而且影響點膠運用，那打膠機受潮要怎樣停止處置？
If the glue beater is in a humid environment for a long time, and does not pay attention to the maintenance of equipment, then the glue beater equipment will easily be damped, damped easily damage the equipment and affect the use of dispensing, then how to stop dealing with the glue beater damp?
打膠機受潮所形成的影響：
The influence of dampness on the glue beater is as follows:
目前大多數的消費線都需求用到點膠工藝，而打膠機受潮則容易會對膠水濃度產生影響，關于回吸式點膠閥所控制的膠水影響更大，這樣會嚴重影響設備的點膠質量，從而招致消費效率的降落。更嚴重的狀況是受潮容易招致機械、點膠閥、壓力桶被腐蝕，從而使設備形成損壞，這關于點膠精度或者運轉速度都會遭到影響，要停止維修頤養！
At present, dispensing technology is needed in most consumption lines, and the moisture of the dispensing machine will easily affect the glue concentration. The glue controlled by the backdraft dispensing valve has a greater impact, which will seriously affect the quality of the equipment dispensing, thus causing a decline in consumption efficiency. More serious situation is that dampness easily leads to corrosion of machinery, dispensing valves and pressure barrels, thus causing damage to equipment. This will affect the dispensing accuracy or speed of operation. We should stop maintenance and maintenance!
處理打膠機受潮的辦法：
How to deal with the dampness of the glue beater:
檢測打膠機能否受潮的辦法能否簡單，只需求檢驗打膠機上的濕度卡顯現的濕度能否大于20%就能夠判別。若確認打膠機受潮后，要運用電熱鼓風枯燥箱對打膠機停止枯燥處置，烘烤溫度控制在125℃左右，烘烤時間為10—20個小時，這樣能夠處理設備濕潤問題。
The method of testing whether the glue beater is damp is simple. It only needs to check whether the humidity card on the glue beater shows more than 20% humidity. If confirming that the glue beater is damp, it is necessary to stop the drying treatment of the glue beater by using the electric heating blast drying box. The baking temperature is controlled at about 125 C and the baking time is 10-20 hours, which can deal with the problem of equipment humidity.
但受潮問題好還是要從基本上去處理，倡議是將打膠機放在枯燥通風無陽光直射的工作環境，同時能夠在環境中放置一些吸濕盒、枯燥劑等防潮物品，這樣能夠有效預防打膠機的受潮問題！
But the problem of dampness should be basically dealt with. The proposal is to put the glue beater in a dry and ventilated working environment without direct sunlight. At the same time, we can put some moisture-proof and dehumidifying articles such as hygroscopicity boxes and drying agents in the environment, which can effectively prevent the problem of dampness of the glue beater.
Reasonable use and maintenance of home care can make the gluing machine play a better role. At present, our company provides high-quality Jinan two-component gluing machine, automobile lamp cold gluing machine and other equipment for various industries, and will provide perfect after-sales home care service. Welcome customers who need to click on our official website to stop consulting: http://www.g89.com.cn.
上一篇：自動點膠機膠體粘度對產品的影響！
下一篇：雙組份打膠機知液灌膠機的清洗辦法
