打膠機對于產品執行精度的需求比較高
打膠機對于產品執行精度的需求比較高，需要點膠精度能夠達到0.1mm左右的范圍才可以滿足點膠要求，很多點膠機都是能夠滿足這樣的要求，要做到這樣的精度要求也不是特別難，只要有一些技術積累的廠家都可以做到，使用打膠機封裝還有特別的好處與優勢操作。
The glue dispenser has a high demand for product execution accuracy. It needs a dispensing accuracy of about 0.1mm to meet the dispensing requirements. Many glue dispensers can meet such requirements. It is not particularly difficult to achieve such accuracy requirements. As long as some manufacturers with accumulated technology can do so, there are special advantages and advantages to use the glue dispenser for packaging.
很多行業都需要使用點膠機才能夠進行點膠，由于存在著人工點膠精度不足和需要大量資金的局限，因此選擇合適的點膠設備能夠為打膠機封裝生產企業減少不少的壓力和成本流出，當然在能夠加快點膠速度的情況下還能夠有效減少負擔，這肯定有很多企業會選擇這樣的生產方式完成工作，打膠機的生產效果也能夠得到眾多廠家的認可。
Many industries need to use dispensing machines to dispense glue. Due to the limitations of insufficient manual dispensing accuracy and the need for a large amount of money, selecting appropriate dispensing equipment can reduce a lot of pressure and cost outflow for the packaging and production enterprises of the glue dispenser. Of course, it can also effectively reduce the burden when it can speed up the dispensing speed. This is sure that many enterprises will choose this production method to complete the work, The production effect of the glue applicator can also be recognized by many manufacturers.
相對于傳統的人力手工點膠，打膠機顯然功效更完善，設備搭載自動上、下料模組、膠量控制單元等，不僅能很好的縮減人力成本的投資，更能確保出膠量的均衡性，從而為使用效果的一致化提供了必要的保障，確保點膠粘合品質。尤其值得信任的打膠機通過技術完善，能更好的實現點膠材料的充分使用，減少浪費，降低成本。
Compared with the traditional manual dispensing, the glue applicator is obviously more effective. The equipment is equipped with automatic loading and unloading modules, glue volume control unit, etc., which can not only reduce the investment in labor costs, but also ensure the balance of glue output, so as to provide the necessary guarantee for the consistency of use effect and ensure the glue dispensing and bonding quality. In particular, the trusted glue applicator can better realize the full use of dispensing materials, reduce waste and reduce costs through improved technology.
點膠精度也是決定一款點膠設備能夠使用行業的作用，例如打膠機封裝需要的0.01mm的精度，那么生產出來的打膠機也需要有這樣的執行精度，不然的話無法滿足點膠要求，就算能夠使用水膠或者光學膠來填涂，也無法適用在打膠機完成封裝工藝，合適生產需求才能夠投入實際生產。
Dispensing accuracy also determines the use of a dispensing equipment in the industry. For example, the 0.01mm accuracy required for the packaging of a glue dispenser, so the produced glue dispenser also needs such an implementation accuracy. Otherwise, it cannot meet the dispensing requirements. Even if water glue or optical glue can be used for filling, it cannot be used to complete the packaging process in the glue dispenser. Only when the production needs are appropriate can it be put into actual production.
雙組份打膠機對于精度的要求也是分很多不同的等級，有些打膠機比較小而有些比較大，例如手機的電容封裝則需要使用打膠機，像電話手表燈類型的產品則需要使用打膠機進行點膠，不同的生產和配件生產出來的點膠機也是不同的，選擇點膠機則需要了解是否能夠滿足行業的精度要求，這樣才能夠便于用戶選擇購買，不然會讓雙方都出現不愉快的結果。
The precision requirements of two-component glue dispensers are also divided into many different levels. Some glue dispensers are relatively small and some are relatively large. For example, the capacitor packaging of mobile phones requires a glue dispenser. Products such as telephone watch lamps require a glue dispenser for dispensing. Different products and accessories produce different glue dispensers. To select a glue dispenser, you need to know whether it can meet the accuracy requirements of the industry, Only in this way can it be convenient for users to choose to buy, otherwise both sides will have unpleasant results.
The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.g89.com.cn 。
上一篇：雙組份打膠機低成本的五種清洗方法
下一篇：打膠機設備檢修的技術一般有幾種方法
